Railblaza Hatch Wedge Pair

• UV stabilised fibreglass reinforced plastic
• Gaps of 25, 50, 75, and 125mm (1, 2, 3, and 5”).
• Supplied as a pair.

Being regular boaties, the team at RAILBLAZA would get consistently frustrated when the friction hinges stopped holding the boat hatches up. Because of this, the Hatch Wedge was born.

The Hatch Wedge can be used in multiple positions to hold marine window hatches open at four different heights. This will keep the boat or yacht well ventilated through the warm summer months without having to worry about the hatches falling down or slamming shut on unsuspecting fingers. The Hatch Wedge also comes with a tether point so that it can be attached to the access hatch to avoid loss.

The Hatch Wedge has been made with a pattern of ridges and recesses that will support most brands of hatch including, Lewmar, Goiot, Moonlight, Vetus, Bomar, Gebo and Maxwell. The Hatch Wedge can hold the hatch open at four different height levels. Simply manoeuvre the wedge to obtain gaps of 25, 50, 75, and 125mm (1, 2, 3, and 5”).

{{widget type=”MagentoCmsBlockWidgetBlock” template=”widget/static_block/default.phtml” block_id=”307″ type_name=”CMS Static Block”}}